|
|
|
|
|
|
Remote Lube Fitting Systems
Hard-to-reach lubrication fittings present a major maintenance problem for the proper care of all types of machinery. Hidden or guarded lubrication fittings can mean production downtime, higher operating and maintenance costs and risk of personal injury to operators and employees-all directly traceable to poor lubrication fitting access. How do you eliminate these problems? Lincoln's Remote Lube Fitting Systems benefit you by providing easy access to lubrication fittings; lubrication is easier, quicker and safer; assures all bearings will be lubricated - and can be safely lubricated while machine is operating; and finally, it's possible to reach hidden, inaccessible or hazardous bearings.
Junction Blocks
Junction block surface mount systems are used to bring multiple lubrication points to a common, easily accessible location. The junction blocks provide a means for coupling lubricant feed lines to bearings with lubrication fittings. They are available in three basic design groups and may be mounted in multiple units to meet all application requirements.
Group Ⅰ
Have 11/32" diameter mounting holes at 90° intervals, for use with 5/16" diameter mounting bolts. This permits horizontal or vertical positioning of lubricant inlet passages.
| Part No. |
No. of
Inlets |
A in./mm |
B in./mm |
C in./mm |
D in./mm |
E in./mm |
| 13147 |
3 |
2 3/4 / 69.9 |
7/8 / 22.2 |
1 / 25.4 |
3/4 / 19.1 |
3/4 / 19.1 |
| 13148 |
6 |
5 3/4 / 146.1 |
7/8 / 22.2 |
4 / 101.6 |
3/4 / 19.1 |
3/4 / 19.1 |
Group Ⅱ
Have 9/32" diameter mounting holes for use with 1/4" diameter mounting bolts. Mounting holes are perpendicular to inlet passages permitting vertical positioning only.
| Group II without Fitting Part No. |
Style |
No. of Inlets |
A in./mm |
B in./mm |
C in./mm |
D in./mm |
E in./mm |
| 14570 |
1 |
1 |
1 1/4 / 31.8 |
3/8 / 9.5 |
- |
3/4 / 19.1 |
3/4 / 19.1 |
| 14562 |
1 |
2 |
1 3/4 / 44.5 |
7/8 / 22.2 |
- |
3/4 / 19.1 |
3/4 / 19.1 |
| 14771 |
2 |
3 |
2 3/4 / 69.9 |
7/8 / 22.2 |
1 / 25.4 |
3/4 / 19.1 |
3/4 / 19.1 |
| 14563 |
2 |
4 |
3 3/4 / 95.3 |
7/8 / 22.2 |
2 / 50.8 |
3/4 / 19.1 |
3/4 / 19.1 |
| 14564 |
2 |
5 |
4 3/4 / 120.7 |
7/8 / 22.2 |
3 / 76.2 |
3/4 / 19.1 |
3/4 / 19.1 |
| 14772 |
2 |
6 |
5 3/4 / 146.1 |
7/8 / 22.2 |
4 / 101.6 |
3/4 / 19.1 |
3/4 / 19.1 |
Mounting Bolts and Nuts
| Part No. |
A in./mm |
B in./mm |
C in./mm |
| 50057 |
1/4"-20 |
1 1/2 / 38.1 |
3/4 / 19.1 |
| Part No. |
A in./mm |
B in./mm |
C in./mm |
| 51304 |
1/4"-20 |
7/32 / 5.6 |
7/16 / 11.1 |
| 51026 |
5/16"-18 |
17/64 / 6.7 |
1/2 / 12.7 |
Accessories
Supply and Feed Line Hose 1/8" ID
| Part No. |
Alvania #2 Grade Grease Filled Coils |
Minimum Burst |
Max. Working Pressure |
Minimum Bending |
Hose Construction |
| 241286 |
26 ft. / 7.9 M |
10,000 psig 690 bar |
4,000 psig 276 bar |
3 1/2" 88.9 mm |
Nylon Tube, Dacron Braid, Polyurethane Cvr |
| 241287 |
35 ft. / 10.7 M |
| 241288 |
40 ft. / 12.2 M |
| 252717 |
200 ft. / 61 M non grease filled |
Note: Use with hose ends No. 241289 or No. 246002. Temperature range: -40° F to 212° F.
Feed Line Nylon Tubing
| Part No. |
Description |
O.D. |
Wall Thickness |
Burst Pressure |
Working Pressure |
Minimum Bending Radius |
Working Temp. |
| 247022 |
500 ft./152.4 M coil non-grease filled |
1/4" 6.4 mm |
.050" 1.3 mm |
2500 psig 172 bar |
625 psig 42.5 bar |
.875 / 22.2 |
-65°F to +150°F -54°C to +65°C |
| 242025 |
25 ft. / 7.6 M coil grease filled |
| 242050 |
50 ft. / 15.2 M coil grease filled |
| 62357 |
100 ft./30.5 M coil non-grease filled |
| 274047 |
25 ft. / 7.6 M coil grease filled |
.062" 1.6 mm |
2000 psig 138 bar |
500 psig 34.5 bar |
0.5 / 12.7 |
-65°F to +200°F -54°C to +93°C |
| 274048 |
50 ft. / 15.2 M coil grease filled |
| 274049 |
100 ft./30.5 M coil non-grease filled |
| 274050 |
500 ft./152.4 M coil non-grease filled |
Steel Tubing
Installation Tools
| Part No. |
Description |
Max. Working Pressure |
| 62175 |
1/8" OD x .020" wall 25' coil 3.2mm OD x .5mm wall 7.6m coil |
4400 psig 300 bar |
| 62176 |
1/4" OD x .028" wall 25' coil 6.4 mm OD x .7mm wall 7.6m coil |
2800 psig 190 bar |
Plastic Tube & Hose Cutter
Part No. 226-12508-5
Replacement Blade
Part No. 226-13095-7
Hose Ends for 1/8" I.D. Hose
Installation Tools
| Part No. |
Description |
| 241289 |
1/8" NPT swedge on hose stud (Requires swedging tool) |
| 246002 |
1/8" NPT field installable hose coupling swedging tool not required) |
Hose Swedging Tool Part No. 241238
Hose Ends for Use with Quicklinc Fittings
| Part No. |
Description |
| 272394 |
Hose stud, 90° (to be used with 272427) |
| 272401 |
Hose stud, straight (to be used with 272427) |
| 272427 |
Threaded sleeve |
| 274238 |
Stainless steel hose stud sleeve |
| 274239 |
Stainless steel straight hose |
Hose End Connecting Tools
| Part No. |
Description |
| 274062 |
Hand vise for quick connect and reusable hose ends |
Bulkhead Connectors
| Part No. |
Style |
A |
B |
C |
D |
| 13154 |
1 |
1/8" PTF |
1/2" / 12.7 mm |
1/4" -28 |
3/16" / 4.8 mm |
| 14054 |
1 |
1/8" PTF |
1/2" / 12.7 mm |
1/4" -28 |
1/4" / 6.4 mm |
| 13155 |
2 |
1/8" PTF |
1/2" / 12.7 mm |
1/4" -28 |
3/16" / 4.8 mm |
| 51055 |
Lock Nut 1/8" N.P.S.M. thread |
Adapther Union
Reducing Bushings
| Part No. |
A |
B |
C |
D |
| 20024 |
1/4" -28 THD |
1/8" NPSF |
7/8" / 22.2mm |
1/2" / 12.7 mm |
| 67132 |
3/8" NPT |
1/8" NPT |
3/4" / 19.1mm |
11/16" / 17.5mm Hex |
| 20011 |
3/8" NPT |
1/4" NPT |
3/4" / 19.1mm |
3/4" / 19.1mm Hex |
| 273482 |
8 mm x 1.0 |
1/8" NPT |
0.96" / 24.4mm |
9/16" / 14.2mm |
Swivels
| Part No. |
Style |
A |
B |
C |
| 66717 |
1 |
1/8" NPT |
- |
11/4" / 31.8mm |
| 91048 |
2 |
1/8" NPT |
1/8" NPT |
1 1/4" / 31.8mm |
| 91308 |
3 |
1/8" NPT |
1/8" NPT |
1 3/8" / 34.9mm |
Tube Connectors
| Part No. |
Style |
A |
B |
Type |
| 66200 |
1 |
1/4" O.D. |
1/8" NPT |
STGT |
| 66201 |
1 |
1/4" O.D. |
1/8" NPT |
90° |
| 66414 |
2 |
1/8" O.D. |
1/8" NPT |
90° |
| 66415 |
2 |
1/8" O.D. |
1/8" NPT |
STGT |
| 66714 |
2 |
1/8" O.D. |
1/4"-28 thd. |
STGT |
| 66716 |
2 |
1/8" O.D. |
1/4"-28 thd. |
90° |
Compression Nut
No. 66260 for use with Style 2 Tube Connectors and 66717 Swivel.
For 1/8" O.D. Tubing. Thread size is 5/16"-24.
Sleve
No. 68462 for use with Style 1 Tube Connectors. For 1/4" O.D. Tubing.
Nut
No. 68464 for use with Style 1 Tube Connectors. For 1/4" O.D. Tubing.
Zerk-Lock® Grease Fitting Adapter
Connects any 1/8" NPTF male tube adapter directly to a standard grease fitting.Aluminum, carbon steel construction; fluorocarbons elastomer seal. Useful for connecting to drivetype fittings or metric fittings. Once installed, the Zerk-Lock cannot be removed from the fitting.
| Part No. |
Threads in. / mm |
A in./mm |
B in./mm |
C in./mm |
| 270784 |
1/8" NPSL Female |
.625 / 15.9 |
.500 / 12.7 |
.500 / 12.7 |
Installation Accessories
No. 247615 Staking Tool
Quicklinc® Fittings
Use for connections to 1/4" nylon tubing only. Can be used with Zerk-Lock® adapter or be screwed directly into bearing.
| Part No. |
Description |
| 243699 |
1/4" tube x 1/8" NPT male 90° swivel fitting |
| 244047 |
1/4" tube x 1/8" NPT male straight fitting |
| 244048 |
1/4" tube x 1/8" NPT male 90° fitting |
| 244053 |
1/4" tube x 1/4" -28 male 90° swivel fitting |
| 244054 |
1/4" tube x 1/4" -28 male 90° fitting |
| 244055 |
1/4" tube x 1/4" -28 male straight fitting |
| 244058 |
1/4" tube x 1/4" tube splicer union |
Divider Valve Outlet & Inlet Adapters for use with 272401 and 272394 Hose Stud
| Part No. |
Description |
| 272658 |
Valve outlet fitting with check - 10mm |
| 272659 |
1/8" NPT male straight fitting |
| Part No. |
Description |
| 432-24313-1 |
Protective Quicklinc rubber boot |
Standard Compression Fittings
| Part No. |
Description |
| 241290 |
1/4" tube x 1/8" NPT male straight fitting |
| 241293 |
1/4" tube x 1/8" NPT male 90° fitting |
Snap-On Connector Fittings
| Part No. |
Description |
| 241388 |
90° snap-on connector for 1/4" O.D. tubing |
| 241389 |
Straight snap-on connector for 1/4" O.D. tubing |
| 66713 |
Compression nut for 241388 and 241389 |
| 82617 |
Straight snap-on connector for 1/8" O.D. tubing |
| 82618 |
90° snap-on connector for 1/8" O.D. tubing |
| 13112 |
Compression nut |
Tube Clamps for 1/4" O.D. Tubing
| Part No. |
A |
B |
C |
No. of Tubes |
| 64533-1 |
- |
1/4" / 6.4 |
1/2" / 12.7 |
1 |
| 64533-2 |
15/16" / 23.8 mm |
1/2" / 12.7 |
3/8" / 9.5 |
2 |
| 64533-3 |
1 3/16" / 30.2 mm |
3/4" / 19.1 |
3/8" / 9.5 |
3 |
| 64533-4 |
1 7/16" / 36.5 mm |
1" / 25.4 |
3/8" / 9.5 |
4 |
| 64533-5 |
1 11/16" / 42.9 mm |
1 1/4" / 31.8 |
3/8" / 9.5 |
5 |
Tube Clamps for 1/8" O.D. Tubing
| Part No. |
A |
B |
C |
No. of Tubes |
| 64532-1 |
- |
1/8" / 3.2 |
1/2" / 12.7 |
1 |
| 64532-2 |
11/16" / 17.5 mm |
1/4" / 6.4 |
3/8" / 9.5 |
2 |
| 64532-3 |
13/16" / 20.6 mm |
3/8" / 9.5 |
3/8" / 9.5 |
3 |
| 64532-4 |
15/16" / 23.8 mm |
1/2" / 12.7 |
3/8" / 9.5 |
4 |
| 64532-5 |
11/16" / 27.0 mm |
5/8" / 15.9 |
3/8" / 9.5 |
5 |
Insulated "J" Type Clamps
Clip Screw
| Part No. |
A |
B |
| 68511 |
7/16" / 11.1 mm opening |
13/32" / 10.3 dia. hole |
| 68535 |
7/16" / 11.1 mm opening |
17/32" / 13.5 dia. hole |
| 68987 |
11/16" / 17.5 mm opening |
7/16" / 11.1 dia. hole |
#6 Thd - 1/4" Long
No. 66202 for use in mounting 64532 and 64533 series tube clamps.
Bulk Supply and Feed Line Hose and Tubing
| Part No. |
Description |
| 241110 |
Feed line bundling spiral wrap (10 ft. / 3 m length) |
| 241120 |
Feed line bundling spiral wrap (20 feet/6m of spiral wrap) |
| 241054 |
Nylon ties (100 count poly bag) 7" / 177.8 m length |
| 241055 |
Nylon ties (50 count poly bag) 7" / 177.8 m length |
| 241056 |
Nylon ties (25 count poly bag) 7" / 177.8 m length |
| 242125 |
Plastic grease fitting cap |
| 274097 |
20 feet/6m of 3/8" convoluted loom/split wrap |
| 274098 |
20 feet/6m of 1/2" convoluted loom/split wrap |
| 274099 |
20 feet/6m of 5/8" convoluted loom/split wrap |
|
|
 |
|
 |
|
|
|
|
